Materials & Craft
Deer Antler Ring: What It Looks Like After Years of Wear
Antler warms slightly with age and takes a patina. How it holds up over years, and how it compares with a wood inlay.
· 6 min read
The Journal
Sizing, materials, care and the questions men actually ask. Written by the people who make the rings, not by a marketing department.
Materials & Craft
Antler warms slightly with age and takes a patina. How it holds up over years, and how it compares with a wood inlay.
· 6 min read
Materials & Craft
Antler is shed naturally and collected, then stabilised and inset into the band. How it is made, and why every piece looks different.
· 6 min read
Care & Repair
Meteorite is iron-nickel, so it can oxidise if left wet. It is sealed to prevent that. What to do and what not to worry about.
· 5 min read
Buying Guides
The Widmanstatten pattern is the giveaway and it cannot be convincingly faked. What to look for, and what imitations get wrong.
· 5 min read
Materials & Craft
The crosshatch in a meteorite ring took millions of years of slow cooling to form and cannot be reproduced. What that means for the ring on your hand.
· 6 min read
Care & Repair
Wood moves with moisture, so a wood inlay asks a little more than bare metal. What to avoid, and what genuinely does not matter.
· 6 min read
Materials & Craft
Barrel oak carries the char from toasting, which is where the colour comes from. How a genuine barrel inlay differs from stained oak.
· 6 min read
Materials & Craft
Koa's figure shifts between honey and chocolate depending on how the piece was cut, so no two rings match. What that means when you order one.
· 6 min read
Materials & Craft
Koa, rosewood and whiskey barrel oak all behave differently in a ring. How each one ages, and what wood inlay needs that bare metal does not.
· 6 min read
Care & Repair
Warm water, mild soap, a soft cloth. What to use, what to avoid, and why abrasive polishes are the fastest way to ruin a brushed finish.
· 6 min read
Sizing & Fit
A comfort-fit band is domed on the inside, so it passes the knuckle more easily and usually runs about half a size large. What to order if you are between sizes.
· 6 min read
Materials & Craft
Black tungsten is a coating over a tungsten core. What that means for how it wears, which finishes age best, and what to expect after a few years.
· 6 min read
Sizing & Fit
Tungsten cannot be cut and rejoined the way gold can. Here is why, how to get the size right the first time, and what happens if your finger changes.
· 5 min read
Buying Guides
Tungsten is heavier and harder; titanium is lighter and more forgiving. Which one suits your hand, your work and how you actually wear a ring.
· 5 min read
Materials & Craft
Tungsten is hard, which means it cracks rather than bends. Why that is a safety feature in an emergency, and what happens if it does.
· 5 min read
Materials & Craft
Tungsten resists scratches better than gold, but it is not indestructible. What marks it, what does not, and why finish matters more than most people expect.
· 5 min read
Materials & Craft
Tungsten carbide is one of the hardest materials used in jewellery. Here is what it is made of, how it wears over years, and the one thing it cannot do.
· 6 min read
Sizing & Fit
A string stretches under light pressure, so before ordering a tungsten band, learn which method of measuring your ring size at home truly works.
· 6 min read